This is not a real hard thing to do but can be tricky. Get a manual from the parts store or from AUTOBOOKSONLINE.COM.
Loosen the tensioner pulley. Put the belt around the alternator pulley and the tensioner pulley. Move the tensioner pulley to the right until the belt is tight. Tighten the tensioner pulley.
You should not have removed the tensioner to install the belt. It has a pivot point that and can be moved in order to release the tension on the belt. Once you install the new belt, leave it off the tensioner until last, pivit it and install the belt oner the tensioner.
You will need to loosen the tensioner pulley. When the tensioner pulley is loose the air conditioning compressor belt will become loose. Put the new belt on and tighten the tensioner pulley.
there is no repair for a belt tensioner. just buy a new tensioner. remove old belt, remove old tensioner, it is held on with one bolt. install new tensioner. install new belt
The belt tensioner is self-adjusting.
Begin by loosening the tensioner pulley. Take the old air conditioning drive belt on. Put the new air conditioning drive belt on and tighten the tensioner pulley.
In order to put in a new belt tensioner in a 1992 Plymouth voyage you must first release the belt from the stock tensioner and remove. Next install the new belt with the stanchions given.
belt tensioner fell off this morning.I need to know how to install new one.
# Install belt on to all pulleys except belt tensioner # Using the extension insert it into the belt tensioner and push away from you.Carefully install the ribbed belt on the tensioner and slowly allow the extension to move toward you as tension is placed on the belt # Remove extension from belt tensioner and inspect the belt to be sure it is seated correctly on all the pulleys if not remove belt and reinstall
it has a manual tensioner
How do you change the supercharger belt tensioner in 1997 Pontiac Grand Prix GTP?
To install the AC belt on a 1994 Acura Integra, first, ensure the engine is off and cool. Loosen the tensioner bolt and adjust the tensioner to create slack in the belt. Remove the old belt and install the new one, following the correct routing as indicated on the engine's belt diagram. Finally, adjust the tensioner to tighten the new belt and secure the tensioner bolt.