To uninstall:
1) Slide seat all the way back.
2) Remove two front screws (Torx T-50)
3) Slide seat all the way forward.
4) Remove two rear screws (Torx T-50)
5) Disconnect wiring harness underneath the front left of the seat.
To Reinstall:
1) Reverse above instructions torquing screws to 38NM.
Look under the driver's seat.
ly under the DRIVER'S seat.
If it does, you won't be able to get in the back on that side. It doesn't fold down.
To remove the front seat from a Ford Taurus, start by disconnecting the battery to ensure safety. Then, use a socket wrench to remove the bolts securing the seat to the floor, typically located at the front and rear of the seat tracks. After lifting the seat out, reverse the process to install it in the Ford Focus ZTS, ensuring all electrical connections and bolt fittings are properly aligned and secured. Always consult the vehicle's service manual for any specific instructions or torque specifications.
I have a 2001 and if you're sitting in the driver's seat, it's right in front of you... under the hood.
Should be bolts or nuts under the car. Either that, or the floorboard has welded studs and the nuts are under the seat at the four corners.
The Ford Freestyle has powered passenger seats and a memory Driver's seat. You can program it to remember two positions for the driver's seat so both husband and wife can have the seat automatically go to the position where they want the seat to be.
You can turn off all airbags in a 2010 Ford Focus using the sensors on the seat belts and the passenger seat.
The center seat in my 2010 ford expedition has been removed leaving 2 bucket seats. How can I install armrest on those seats?
The first model year that a Ford Explorer was available with a third row seat was ( 2002 )
how do i take a drivers seat out of a 02 ford mondeo,do i have to disconect the battery before i take it out
Order a new seat locking lever from FORD, it should be accessable from the drivers side where you adjust the seat.