Do you already have the old one out?
Continental/VDO New A/C Heater Blower Motor PM4820
Remove the wiring harness to the heater blower fan. Remove the retaining bolts. Remove the fan from the blower. Reverse the process to install the new heater blower fan.
To replace the front heater blower on a 1998 Lincoln Navigator, first disconnect the negative battery cable to ensure safety. Remove the glove compartment to access the blower motor, then disconnect the electrical connector and unbolt the blower motor from its housing. Install the new blower motor by reversing these steps, ensuring all connections are secure before reassembling the glove compartment and reconnecting the battery. Test the blower to make sure it operates correctly.
No.
Heater hoses on a 1993 Lincoln Continental are located on the heater core behind the dashboard. There is no real easy fix. It includes quite a bit of labor.
The blower motor is shot, if it doesnt come out of the vents, feet, windshield, anywhere, its the blower motor, take it in and get it fixed before winter comes, your heated leather seats wont keep you warm enough bud.
Remove the wiring harness from the back of your 1980 Chevy Camaro heater blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.
the heater blower resistor is located on the passenger side footwell near the firewall. a complete how-to replace the resistor, along with photos is available on newcougar.org http://www.newcougar.org/forums/how-tos/3732-fixing-heater-blower-resistor-install-photos.html
The dash and fire wall need to be taken out.
The problem is either the blower motor resistor or the blower speed selector switch.
Blower Motor Resistor is located under the hood on the fire wall behind the right valve cover and the heater hose. It's about the size of a deck of playing cards.
To install the heater blower motor in a 1994 Chevrolet Suburban, first disconnect the negative battery cable for safety. Remove the blower motor cover and disconnect the wiring harness from the old motor. Unscrew the old blower motor from its mounting and replace it with the new one, securing it in place. Finally, reconnect the wiring harness, replace the cover, and reconnect the battery cable.