Big job==TAke it to a garage or get a manual and do it right
removal of 95 chevy corsica
A Haynes or chiltons manual has the how to. Or do a search for a forum for Chevy corsica specific
To replace the heater core in a 1995 Chevrolet Beretta, start by disconnecting the battery and draining the coolant from the radiator. Next, remove the dashboard and the center console to access the heater core housing. Disconnect the hoses from the heater core, unbolt it from the housing, and then install the new heater core in reverse order. Finally, reassemble the dashboard and refill the coolant, ensuring there are no leaks.
Remove neg on battery for 3 minutes.
How do you remove a heater core on a 1995 Audi A6?
Under dash, near firewall, passenger side.
The heater core is inside the heater unit on the passenger side under the dashboard
Drain the water from your 1995 Chevrolet Corsica cooling system. Remove the water supply hose from the top of your thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.
The firing order is 1342 and the coil packs are 41 and 32.
On a 1995 Chevrolet Corsica, the starter is located on the underside of the engine, mounted to the transmission bell housing. It is positioned on the driver's side of the vehicle, near the firewall. To access it, you may need to lift the vehicle and remove the protective splash shield if equipped. Be sure to disconnect the battery before attempting any repairs.
take it to a garage you fool
go to sears