Drain about 1 gallon of coolant from radiator Remove housing at engine end of upper radiator hose Make note how thermostat is installed Clean both surfaces Install new thermostat and gasket Re-fill coolant slowly to prevent an "airlock" Start engine and watch for leaks Run engine to normal operating temperature with heater on Check coolant level
Trim Panel Retainers Clips hold the door trim in place on a 1999 Chevrolet Blazer.
To install a thermostat in a 1999 Chevrolet Lumina, first, ensure the engine is cool and disconnect the negative battery cable. Remove the upper radiator hose from the thermostat housing and then unbolt the housing to access the thermostat. Replace the old thermostat with the new one, making sure to align it correctly, and apply a new gasket or sealant as needed. Reassemble the housing, reconnect the hose, and refill the cooling system before testing the engine.
yes
I have an 1999 Chevrolet Blazer with 4 wheel drive, and it has about a 12-gallon tank.
It is built into the alternator NEUTZ
R134a
It should be, yes.
5x 4.75
no
R-134
what is recomended when replacing timing chain in 99 blazer with a 4.3 v6
NO.. It will not even begin to bolt up.In late 1999 chevy REDESIGNED all the engines and transmissions. Everything from late 1999 and up is DIFFERENT then late 1999 and down. Nothing will interchange.