0
How do you install an alternator on the right or passenger side of a Chevy 1989 4 3 V6 want to use the 6 grove or serpentine belt?
disconnect negative side of battery, remove air filter and entire assembly, it pulls up off pegs. Remove the 7 bolts that hold upper half of fan shroud assembly, they are 10mm i think. Move top radiator hose up and toward you to get it off the formed holder for it, pull fan shroud up and off vehicle. Take an 3/8" extension without a socket on it and find square hole it fits right into below idler/tensioner where belt will be at your extreme left facing motor. Add the ratchet and a pipe over it for leverage and pull and belt will come off. There's 2 bolts on front bottom and one bolt on backside you'll have to go inside and remove doghouise to get to. Couple of electrical connections back there. Couple hours if you fool around with it.
What else can I help you with?
Where is the alternator on a 2001 Chevy Impala?
Follow the route of the serpentine belt. It drives the alternator.
How do you replace the alternator on a 2004 Chevy Malibu?
To replace the alternator on a 2004 Chevy Malibu, first disconnect the negative battery cable to prevent electrical shock. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and power wire from the alternator, and then install the new alternator by reversing the steps. Reattach the serpentine belt and reconnect the battery cable once everything is secured.
How do you replace a serpentine belt in a 1991 Chevy truck?
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
Where is the water pump located on a 1994 Chevy Cavalier?
If you have a 2.2 liter 4 cylinder, the water pump is under the alternator on the passenger side and below the serpentine belt tensioner.
How do you install a serpentine belt on a 1994 Z71 305 Chevy engine?
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
What is an serpentine belt in an Chevy Venture?
A serpentine belt run multiple auxiliary applications (IE AC, Power Steering, Alternator)
How do you replace the alternator on a 1993 Chevy Beretta?
To replace the alternator on a 1993 Chevy Beretta, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then disconnect the wiring harness from the alternator. Unbolt the alternator from its mount and carefully take it out. Install the new alternator by reversing these steps, making sure to secure all connections and reattach the belt properly.
How do you install a serpentine belt on a 92 Chevy Corsica?
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
Where is the serpentine belt located on a 1997 Chevy Malibu?
It is the belt driving the water pump, power steering pump, alternator, & A/C Compressor. I think on this engine it is located on the passenger side front of engine.
How do you replace an alternator on a 95 Chevy lumina 3.4l?
The alternator on a 95 Chevy Lumina 3.4l is replaced by disconnecting the wiring harness, loosening the retaining bolts, and removing the serpentine belt. The alternator can then be unbolted, removed, and a new alternator installed.
How to Replace belt tensioner on 2000 Chevy cavalier?
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
How do you replace an alternator in 2003 a Chevy Cavalier?
Begin by removing the 2003 Chevy Cavalier alternator belt. Remove the wiring from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
