How do you install 2002 saturn sl2 4 cyl
5qts
The 2002 Saturn IAT sensor can be found on the top of the engine. The IAT sensor will be near the injector fuel pump.
On the 2002 Vue with the v6 engine, the sensor is on the side of the engine. The sensor is right beside of the oil filter.
You will need 5 quarts to change the oil and filter in a Saturn.
the answer is no. 2002 was the first year the liberty was made. in 2003 they change the computer modules..the only engine you can put in a 2002 jeep liberty is a 2002 engine
CAN??? Yes, certainly. But there will be significant additional costs since the head and EGR system are different.
The starter on the 2002 Saturn vue is located on the front underside of the engine, follow the positive(red) cable from the battery and it should connect to the solenoid which is part of the starter.
the computer tells it to glow.
no.... The Saturn Sc2 (in all years of production) has a timing chain......much better in my opinion.
To replace the spark plugs in a 2002 Saturn Vue AWD with a 3.0-liter V6 engine, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the engine cover if necessary, then detach the ignition coil connectors and bolts to access the spark plugs. Use a spark plug socket to carefully remove the old plugs, check their condition, and install the new plugs, tightening them to the manufacturer's specifications. Reassemble the ignition coils and reconnect the battery terminal.
To change the water pump on a 2002 Saturn L200, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator and remove the drive belt. Next, remove any components obstructing access to the water pump, such as the engine cover, and then unbolt the water pump from the engine block. Clean the mounting surface, install the new water pump with a new gasket, reassemble any removed components, refill the coolant, and reconnect the battery.
The fuel pump relay on a 2002 Saturn I200 is located in the engine compartment near the driver's side. It sends power to the pump and turns it off when the vehicle is not running.