There is a hoose leading from the upper portion of the Crankcase (where piston and engines are,the upper visible part) to the intake manifold. remove the end that conects to the intake manifold and add it the filter breather, the other end just leave it open or connect a small hose. I recomend a pass by filter it s like a round filter that allows you to connect to hoses to it so you just put this filter in the middle of the hose to filter that air.
How do you install a starter in a 1977 Chevrolet Caprice Classic with a 5.7 liter motor?
You will need to remove the tire and wheel from your 1992 Chevrolet Caprice Classic. Remove the brake shoe spring and caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
1996 caprice can you remove 4.3 engine and install a 5.7?
wait until you have to replace the windshield
Attach the wiring harness to the and of your 1986 Chevrolet Caprice ignition switch. Slide the ignition switch into the ignition slot. Tighten the ignition switch with the retaining ring.
Can a wood grain steering wheel be installed n a 94 caprice classic that has a. Air bag in the factory steering .
how do you install a aftermarket radio in 1986 caprice
yes you can install it. but you need two boxs a 4 12 an a 2 12 box.
No you can not but you can install heavy duty springs that will raise the front end 2 1/2 to 3 inches.
Check with the dealer as many people do not smoke so they do not install them.
Drain the water from your 1983 Chevy Caprice Classic cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
On the distributor cap where the wiring hooks up is a terminal that says tach. Install the red wire to it and the black or ground wire to a suitable ground. Sometimes the tach has a green wire that connects to the white one coming from the ignition coil plug side that has 2 wires