1993-1997 you hook the cables to the battery.
1998-2004 you hook the cable to the jump start posts under the hood, passenger side.
You hook the red and black jumper cables to the red and black jump start posts under the hood on the passenger side.
The Dodge intrepid will not start after overheating because it blocks the radiator cap.
To jump start a 2003 Dodge Intrepid, first, ensure both vehicles are turned off. Connect the positive (red) jumper cable to the positive terminal of the dead battery, then attach the other end to the positive terminal of the working battery. Next, connect the negative (black) cable to the negative terminal of the working battery and attach the other end to a grounded metal surface on the Intrepid, away from the battery. Start the working vehicle and then attempt to start the Intrepid.
97 dodge intrepid, new fuel pump, won't start
To jump start a 2003 Dodge Intrepid, first ensure both vehicles are in park with their engines off. Connect the red positive (+) jumper cable to the dead battery's positive terminal, then attach the other end to the booster vehicle's positive terminal. Next, connect the black negative (-) cable to the booster vehicle's negative terminal and attach the other end to an unpainted metal surface or a grounding point on the Intrepid. Start the booster vehicle, let it run for a few minutes, then attempt to start the Intrepid.
You put the red cable on the red stud by the air filter. You put the black cable on the ground stud on the strut tower.
1999 dodge intrepid is not starting I change crank and camshaft sensor and it stall will not start what can i do next.
what do i do
Dodge Intrepid was created in 1993.
Battery is dead.
No.
Yes