To determine if the hazard flash switch is bad in a 2001 Impala, check if the hazard lights activate when the switch is pressed. If the lights do not turn on or blink inconsistently, the switch may be faulty. Additionally, inspect the fuse related to the hazard lights; a blown fuse could also prevent the lights from working. If both the switch and fuse are functioning, further investigation into the wiring or relay may be needed.
How do you replace the hazard switch
Try turning the hazard flashers on and off a couple times, see if that starts your signal lights working. If so, replace the hazard switch/module.
What year is your Impala? 2001
Maybe part of the hazard warning module it is on my 2001 Impala
YES.....
Gm does not use inertia switches.
If you are talking about the flasher is is part of the hazard warning module If you are talking about the flasher is is part of the hazard warning module
Its in the key switch
On my 2001 it is part of the Hazard switch. You have to replace the entire switch on a 2001.
The hazard flasher on a 2001 Toyota Camry is located under the dash, near the hood release. It triggers the hazard lights to flash and regular intervals to notify other drivers.
turn signal switch is the hazard button! Pull out hazard button and replace it! good luck!
spend 600 dollars at dealership