One sign is if you place you foot on the brake pedal and apply steady pressure, and the pedal slowing goes down toward the floor, the master cylinder is bad. As this car is 9 years old, when replacing the master cylinder, replace all the brake fluid in the entire system with fresh fluid from an unopened can. 1. It could have a leak at the master cylender. 2. the brake peddle slowly goes all the way to the floor.
Either the clutch master cylinder or the clutch slave cylinder or the clutch hydraulic lines are leaking.
The booster is on the driverside fire wall and the MASTER CYLINDER IS BOLTED TO IT.
it should be behind the cowel on the drivers side above the master brake cylinder.
In the fuel tank
You do not reset a master cylinder. You should bench bleed it before installing.
Put a new master cylinder on. Throw the old one away.
If the master cylinder reservoir is empty, you have a leak somewhere. If the master cylinder reservoir is full, the master cylinder is bad.
a bad wiper control module, its the box located on the firewall above/next to the master brake cylinder.
You have a vacuum line disconnected or broken under the hood, check in the area around the master cylinder and the vacuum reservoir.
Yes.
You will need to remove the door panel of your 1997 Chevrolet Corvette. When the door panel is removed the mirror retaining bolts will be visible. Tighten the mirror retaining bolts.
Under the brake master cylinder.