answersLogoWhite

0

What else can I help you with?

Related Questions

How do you open tailgate door on a bronco when the window doesn't go all the way down?

If the tailgate window on your Bronco doesn't lower completely, try using the manual release mechanism. You can often find a small lever or handle near the latch or on the tailgate itself. If that doesn't work, check the owner's manual for specific instructions, or it may be necessary to troubleshoot the window's power mechanism or contact a professional for repair.


How do you lower tailgate window when motor fails on a 1987 ford bronco?

As far as I know there is no way to get the window down other than removing the motor itself. The motor is what holds the window up when closed. Make sure its the motor that has failed. There is also a switch located on the drivers side latch inside the gate that is designed to not allow the window to open when the gate is down. If that switch fails it the window motor will not function at all. I used a wire jumper to bypass the switch and solved my problem.


How do you change the tail lights on a 2003 Ford F150?

lower the tailgate, remove the 2 screws on the side when you lower the tailgate, pull assembly out and replace


How do you open back window of 79 suburban?

You can turn the key until just the power is on, and push the down switch to the lower right of the dash, or use a key in the lock on the back of the tailgate (if you have the key).


How do you remove tail light cover on 2005 Ford Superduty?

open tailgate and there will be two screws. upper and lower. upper by the tailgate latch.


How do remove the tailgate on Honda Ridgeline?

To remove the tailgate on a Honda Ridgeline, first, lower the tailgate fully. Locate the two bolts on each side of the tailgate hinge; these typically require a 10mm socket. Remove the bolts, then gently lift the tailgate upwards to detach it from the hinges. Be sure to have a second person assist, as the tailgate can be heavy and awkward to handle.


How do you lower a stuck tailgate on a 1993 Dodge 250?

How do you lower a stuck tail gate on a 1993 Dodge 250 pickup?


How do you work on a rear window of 1990 Toyota 4 runner when the motor stopped with window up?

The best way, is to go inside, remove the tailgate's interior trim and moulding. After removing the plastic sheeting, you can then access the regulator (the scissor looking part with the motor). Remove the bolts that hold the regulator. Now very carefully without bending in or out, because you could break the back-light (rear glass), lower the whole assembly down into the tailgate. You may have to jiggle it up and down slightly. When the glass has cleared the frame, pull on the cables that activate the latches. With the help of an assistant on the outside lower the tailgate. Now you can work on the problem with ease. Inspect the regulator, wiring etc. for wear and tear as well as rust.Good luck!


Why when you open a new browser window does it appear reduced size?

You can correct this size problem. Just open a browser window and resize it manually (not using maximize button). Place the mouse pointer on the lower rigth corner of the window, a resize handle will appear. Click and drag to resize the window to the full size. From now on every browser window you oen will appear in full size. If you find this info useful, please vote!!!


How do you remove a 2000 Nissan Frontier Tailgate?

First remove gate support cables. Lower tailgate 1/2 way pull left side toward you. Swing it to the left, and hold tight


1987 4 Runner rear window will not unlock tailgate and is in down position will not go back up How do you fix this?

Internally its connected to the window motor gear drive. Lower the window and open the door. Remove the 2 panels that cover the door mechanism. Locate the lock and its arm. You will probably see that the plastic clip that holds it in place has either come off or broke. Reinstall or buy a new one as necessary.


How do I open the tailgate to a 1989 jeep grand wagoneer?

You first have to lower the rear window. If the switches don't work you need to remove the carpet covering the tail gate then remove the metal cover from the tail gate. You will need to reach inside and disconnect the window from the arms that raise it so that it can be lowered. once it is lowered you should be able to open the tail gate.