Measure from the center of one stud to the center of another stud furthest away.
It depends on what you mean by "measure": perimeter or area, or lengths of medians perhaps, or angle bisectors.
5x120 is a European pattern... most likely volkswagen/Audi. some Mercedes and BMW use the 5x120, but not that high of an offset. +45 is FWD offset territory
An English term, an ell is 45 inches, or 1/32 of a bolt.
If you mean angles then it is a right angle triangle or an isosceles right angle triangle
5x114.3. Center Bore: 67.1. Hardware: 12x1. 50 Lug Offset: 45-55mm
A draper's measure of 45 inches is called an eil.
I assume you mean a triangle. 180 degrees - 45 degrees - 90 degrees = 45 degrees
45 degrees
45 apex(:
42-45 inches
45
obviously not, one is like 45 cc bigger, they have a different crank case with a different bolt pattern