The fuse box on a Chevy Impala is opened by pressing the release on the side. It contains most of fuse which control the vehicle's electrical system.
a black box
The fuse box is located upunder the driverside dash open the door then look right under the steering wheel and there it is!!
Open the driver door and remove the panel on the end of the dash
The starter fuse on a 2004 Chevy Impala is located in the under-hood fuse box. To access it, open the hood and find the fuse box situated near the battery. The specific fuse for the starter is usually labeled as "IGN" or "Starter" in the diagram on the lid of the fuse box. If you're having issues, check this fuse for any signs of damage or failure.
check either end of the dash when you open the doors the fuse panel doors are the pull type
The fuse box in a 2001 Chevy Impala under the hood can be opened and got behind by squeezing the tabs together to pull the top off. The fuse boxes inside the Chevy Impala can be reached by popping each cover off of the fuse boxes on either side panel of the dash.
in the fuse box under the hood
The fuse diagram for a Chevy Impala is typically found in the owner's manual, which includes a detailed layout of the fuse box and the functions of each fuse. Additionally, the fuse box cover itself often has a diagram that indicates the location and purpose of each fuse. For the Chevy Impala, the primary fuse box is usually located under the dashboard on the driver's side or in the engine compartment. Always refer to the specific year of your Impala for the most accurate diagram and information.
Don't know about a fuse but there is a "Power Seat Circuit Breaker" in the Passenger Side Instrument Panel Fuse Box(open door, remove cover)...
The 1965 Chevrolet Impala SS fuse box requires a 20 amp fuse for the taillights. A 30 amp fuse can be used when a 20 amp fuse is not available.
It is on the passenger side fuse box it will tell you in the owners manuel
It's in the Passenger's Side Instrument Panel Fuse Block. Open the Passenger's door. On the side of the Panel, remove the Fuse Cover and locate the Fuse marked {RADIO}.....