0
What else can I help you with?
Disadvantages of oil consumption?
Oil consumption will give you the skitters.
What you must do to inspect the drink tube assembly?
perform a tube leak test perform a tube leak test perform a tube leak test perform a tube leak test perform a tube leak test perform a tube leak test perform a tube leak test
Which of the following is one of the first steps a technician should take when a customer reports excessive oil consumption?
Check oil level and condition of oil (strong odor of gasoline contamination) then do a compression test.
Who should perform the validation test?
Developer perform the validation test
How do you tell if the bottom end has gone in an Audi?
To determine if the bottom end of an Audi engine has failed, listen for knocking or tapping noises from the engine, especially during acceleration. Check for excessive oil consumption or leaks, which can indicate worn bearings. Additionally, perform an oil pressure test; low pressure can signify bearing wear or damage. Finally, inspect for metal shavings in the oil, as this can indicate significant internal damage.
Why no oil in oil filter?
Coz they make to filtering it not fir oil consumption
How much will old oil increase fuel consumption?
It will not increase fuel consumption.
Oil consumption for a 2002 ford expidition with 95000 miles?
what is the oil consumption specs for a 2002 ford expiditon with 95000 miles
Is refined soybean oil with a peroxide value of 4.62 acceptable for human consumption?
Soybean oil or any other edible oil(cooking oil) with a peroxide value of 4.62 is acceptable for human consumption. Peroxide value above 5 is not acceptable for human consumption.
How do you perform hemogluco test?
by
Lube oil consumption of diesel engine?
Lube oil consumption depends on engine design and motor operating conditions. Dieselnet is a good source. Typical oil consumption values for pre-1980s engines were 0.46 g/kWh (0.34 g/bhp-hr; 0.25% of fuel consumption), pre-1990 engines ranged between 0.33-0.48 g/kWh (~0.15 - 0.20% of fuel consumption). A test on a number of 2002 heavy-duty and medium-duty engines in the US yielded an average of 0.22 g/kWh (0.1% of fuel consumption). Year 2007 heavy- and medium-duty engines consume on average 0.08 g/kWh (around 0.03% of fuel consumption)
Is tongue oil food safe for consumption?
Tung oil, also known as tongue oil, is not considered food safe for consumption. It is commonly used as a wood finish and should not be ingested.
