0
The following procedures came with a replacement remote I bought for my 2000 Suburban.
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver's door panel-continue to hold down until instructed
to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks.
This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
What else can I help you with?
How do you program a 2001 ram key fob?
You need a scan tool.
How do you program the remote key fob on a 2001 Chevy Malibu?
You will need to contact a dealership to program the remote key FOB on a 2001 Chevy Malibu. Stock remotes can only be programmed at Chevy dealerships.
How do you program a keyless remote for 2001 Malibu?
You will need a scan tool to program this Keyless Fob.
How do you program a key fob for a Chevy Suburban?
put the car in reverse, start the car, and pour gasoline in the anti-freeze container
How do you program a Saturn 2001 sc2 keyless entry module?
To add a new key fob, take the vehicle and the key fob to an authorized dealer. To re-program a key fob after replacing it's battery, open the key fob, then read and follow the instructions inside.
How do you program key fob for 2001 grand marquis?
To program a key fob for a 2001 Mercury Grand Marquis, first, insert the key into the ignition and turn it to the "On" position (do not start the engine) and then back to "Off." Repeat this process eight times, ending with the key in the "On" position. After hearing a chime, press any button on the key fob to program it. Finally, turn the key back to "Off" and remove it from the ignition to complete the programming.
How do you program key fob on 2001 ford econoline?
To program a key fob for a 2001 Ford Econoline, you'll first need to have two working keys. Insert the first key into the ignition and turn it to the "On" position without starting the engine, then back to "Off." Repeat this process with the second key, and finally, insert the new fob key and turn it to "On." Press any button on the fob, and if done correctly, the locks will cycle to confirm programming.
H0w do I Reset key fob for a VW Golf 2001?
how do i reset key fob for a vw golf 2001 how do i reset key fob for a vw golf 2001
Will a Chevrolet key fob work with a GMC?
negative (no)
How do you program a key fob to a 2006 Chevy Malibu?
How do you program a key fob to a 2003 Chevy Malibu
How do you program a 1995 Lumina APV key fob?
To program any kind of key fob you have to take it to a dealership.
How do you program fob on 2001 XK8 jaguar?
To program a key fob for a 2001 Jaguar XK8, you typically need to be inside the car with the doors closed. Insert the key into the ignition, turn it to the "On" position without starting the engine, then turn it back to "Off." Repeat this process five times, ending in the "On" position. After the fifth time, the doors should lock and unlock, signaling that the vehicle is in programming mode. Press the lock button on the fob to program it, then turn off the ignition to complete the process.
