How do you program a Pontiac Vibe keyless entry remote?

Answer 1

Start by:

1. Remove the key from the ignition
2. Close all the doors
3. Lock all the doors
4. Unlock the driver's door
5. Open the driver's door

Perform these steps within 5 seconds:

1. Insert the key into the ignition (do not turn)
2. Remove key
3. Insert the key into the ignition (do not turn)
4. Remove key

Perform these steps within 40 seconds:

1. Close then open the driver's door
2. Close then open the driver's door
3. Insert the key into the ignition (do not turn)
4. Remove key

Perform these steps within 40 seconds:

1. Close then open the driver's door
2. Close then open the driver's door
3. Insert the key into the ignition and leave it
4. Close the driver's door
5. Turn the ignition to ON (do not start)
6. Turn the ignition to OFF
7. Remove the key

Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Restart completely if the locks do not cycle at this point.

Perform these steps within 40 seconds:

1. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds then release both buttons.
2. Immediately press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat this section.
3. Repeat this section as needed for each new remote.

Open driver's door