0
If you have an original key you can do it very easily with that. Buy a new key with the chip in it and get it cut (usually only about 2-3 bucks) Place the existing key in the ignition and turn it to full power up, without starting it for 2 or 3 seconds. Turn it off and then place the new key in and do the same thing but let it sit that way for 3-4 minutes. This should program the new chip without having to pay the 30-100 for the dealer to do. The new key with a chip will run about 30 at the dealer, but if you look on eBay for blank "chip" keys, you can find them for 10-15 dollars. Good luck! I actually got this info from a service tech at Chevy who was a friend of mine. I tried it, and it worked.
What else can I help you with?
How do you program a 2005 dodge caravan key fob?
I've got a better question, why is this question in the Chevy venture forum ?
How do you program the remote key fob on a 2005 Chevy Malibu maxx with remote start?
How do you program the remote key fob on a 2005 Chevy Malibu maxx
How do you program a key fob to a 2006 Chevy Malibu?
How do you program a key fob to a 2003 Chevy Malibu
How do you restore key fob door opening on your 2005 almera 1.5 se?
I've got a better question, why is this question in the Chevy venture forum ?
How do you program the remote key fob on a 2001 Chevy Malibu?
You will need to contact a dealership to program the remote key FOB on a 2001 Chevy Malibu. Stock remotes can only be programmed at Chevy dealerships.
How do you program key fob for Chevy Colorado?
go to the gm dealer
How do you program the remote key fob on a 2005 Chevy Colorado?
To program a remote key fob for a 2005 Chevy Colorado, first, sit in the vehicle with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine, then press the "Unlock" button on the driver's door. Next, turn the ignition off and remove the key, then press and hold the lock and unlock buttons on the fob simultaneously for about 15 seconds. Finally, turn the ignition back to "On," and the fob should be programmed; test it by locking and unlocking the doors.
Change battery in key fob for Chevy Venture?
To change the battery in a Chevy Venture key fob, first, locate the small notch or groove on the side of the fob. Use a flathead screwdriver or a coin to gently pry the fob open. Once opened, remove the old battery, usually a CR2032 or similar type, and insert the new battery with the positive side facing up. Finally, snap the fob back together and test the buttons to ensure it works.
How do you program key fob 2010 Chevy Express van?
How can i program 07 chvi van key
How do you program a fob for a Chevy?
look in your owners manual and if nothing in there you will have to let the dealer do it.
How do you program a Chevy key fob?
These have to be done by a dealership. It is programmed through the ECM for security.
How do you program a Chevy Colorado key fob?
These have to be done by a dealership. It is programmed through the ECM for security.
