0
Programming spare keys
You can program your own coded keys to your vehicle. Please read and
understand the entire procedure before you begin.
Tips:
• A maximum of eight keys can be coded to your vehicle.
• Only use Securilock keys.
• You must have two previously programmed coded keys (keys that
already operate your vehicle's engine) and the new unprogrammed
key(s) readily accessible.
• If no previously programmed coded keys are available, you must take
your vehicle to your dealer to have the spare key(s) programmed.
1. Insert a previously programmed
coded key into the ignition.
2. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
3. Turn the ignition to the 1 (LOCK) position and remove the coded key
from the ignition.
4. Within ten seconds, insert the second previously coded key into the
ignition.
5. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
6. Turn the ignition to the 1 (LOCK) position and remove the second
previously programmed coded key from the ignition.
7. Within twenty seconds of removing the previously programmed coded
key, insert the new unprogrammed key into the ignition.
8. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second but not
more than 10 seconds.
What else can I help you with?
How do you get a replacement key for 2003 Ford Mustang?
Ebay sales them but then after you get the replacement you may have to have a Ford dealer program it to work with the ignition switch.
How do you unlock Ford Escape without key?
One way to unlock a Ford Escape without a key is with the car remote. Another way to unlock a Ford Escape without a key is by using a coat hanger. You may have to call a locksmith to open your car door for you.
How do you program a 2009 Ford Ranger key?
Take the key to a ford dealership
How do you program a 2001 Ford Escape key fob?
It is done by turning on and off the key a certain number of times and then pressing a button on the remote. Your owner's manual should have the exact instuctions.
How do you program 2003 key switch?
program new keyswitch for 2003 odyssey
What is the fuel pressure for 2003 Ford Escape?
At idle should be 13-20 psi With key on engine off should be 23-31 psi
How do you program key fob on 2003 ford truck?
To program a key fob for a 2003 Ford truck, first, sit inside the vehicle with all doors closed. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and then back to "Off" eight times within 10 seconds. The doors should lock and unlock, indicating the vehicle is in programming mode. Finally, press any button on the key fob to program it; the locks will cycle again to confirm programming, and you can program additional fobs if needed.
Do you need to pump the gas pedal before starting your 2003 ford escape?
Normally you don't touch the gas pedal , just turn your ignition key
How do you program a key fob to a 2006 Chevy Malibu?
How do you program a key fob to a 2003 Chevy Malibu
Programming keyless entry remote 2003 ford explorer?
Cycle the key on/off 8 times and the door locks will lock and then unlock. Press the lock button on your key fob to program it
How do you program door locks 2003 Ford Focus?
To program the door locks on a 2003 Ford Focus, first, ensure all doors are closed and the key is in the ignition. Turn the key to the "On" position (not starting the engine), then press the "Lock" button on the driver's door control panel. While holding the "Lock" button, turn the key back to the "Off" position and then back to "On" again. Repeat this process until you hear the locks cycle, indicating that the programming mode is active. After that, you can program new remotes by pressing the "Lock" button on the remote.
What color is the key sense wire in 2004 Ford Escape?
The key sensing wire in a 2004 Ford Escape is black and pink. It is always a good idea to verify the color of the wire before doing any work.
