For a 94-97 (may work for 98) single button remote:
- Flip Valet switch to ON position
- With key in ignition, turn key to ON, then OFF
- Flip the valet switch to OFF, then ON/OFF, ON/OFF (that's twice), and you should hear a confirmation siren chirp.
- Turn the ignition switch On/OFF, ON/OFF (twice), and you should get another confirmation chirp.
- You are now in programming mode. Push button on the remote, and you should hear a chirp to confirm programming completed successfully.
- After 5 seconds, the programming mode will close automatically.
Where is a suzuki 1997 sidekick distributor located?"
no
what are the gear ratios in the 5-speed transmission and the transfer case on a 1993 suzuki sidekick 4-door?
To change the batteries on the keyless entry remote for a 2006 Suzuki Grand Vitara, first, locate the small slot or tab on the side of the remote to open it. Use a small flathead screwdriver to gently pry it apart. Once opened, remove the old battery and replace it with a new CR2025 battery, ensuring the positive (+) side is facing up. Finally, snap the remote back together and test it to ensure it works.
2600
The EGR valve on a 1998 Suzuki Sidekick is not repairable. It has no replaceable or user serviceable pieces or parts.
No, The 1998 Suzuki Sidekick has an interference engine. The belt must be replaced every 60,000 miles.
I have a 1998 Suzuki Sidekick JX 4X4 4 Doors, How do I set the timing? Please show me the steps thank you.
Suzuki Sidekick has a cable for the clutch. No fluid required. If it hard to push or seems to 'stick' then replace the cable.
how to change front bumper in 1996 Suzuki sidekick sport
1342
I believe they are 4"......