0
1. Insert an existing programmed working key into the ignition cylinder.
2. Turn ignition to the ON position for 5 seconds, then back to OFF position.
3. Remove the existing key and within 5 seconds insert new key and turn
it to the ON positiion for 5 seconds.
4. Turn key OFF then back to ON. The key is now programmed.
Start vehicle to test key.
What else can I help you with?
How do you program a new transponder key for a Pontiac grand prix?
I know if you just change the battery you hold down the lock and unlock at the same time for about 10 seconds. This will reset the transponder.
Can you program a transponder key without the original key for a 1998 mercury grand marquis?
Yes, this can be done by a Ford dealer.
Where is the transponder on a Jeep Grand Cherokee?
In the key
Can you program a new transponder key for a Toyota Camry without the original transponder key?
The dealership can generally program a new transponder key based on the VIN. Most good locksmiths can reproduce the key, but would need the original to do so.
How do you program the transponder key in 2012 Camry?
how to program 2012 toyota fortuner
How do you program my transponder key?
I don't program your transponder key. Try taking it back to a garage of the same type as your car e.g ford and they may be able to provide some help.
How do I program a Toyota matrix transponder key?
A Toyota Matrix transponder key is factory programed. At times this programing can fail. It is a quick process for the dealership to reprogram the key. A lost key and transponder will cost approximately $100 to replace depending on model.
How do you program a dodge stratus transponder chip key?
Go to your Chrysler dealer and ask them to program it.
How do you program a blank key for Mitsubishi endeavor 2006?
You can program a blank key for Mitsubishi Endeavor 2006 using Transponder Key Blank Fits.
How do you program a transponder key for a 2007 Toyota Camry?
You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.
How do you program a transponder key for a 2005 Nissan?
Programmer and PIN code required
How do i program a transponder key for a jeep liberty if you only have the 1 key?
The dealer has to use his scan tool to do it.
