To program a key fob for a Saturn Ion, first, sit inside the car with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Repeat this process five times, ending in the "On" position; the locks will cycle to indicate programming mode. Press and hold the "Lock" and "Unlock" buttons on the fob simultaneously for about 15 seconds, then release them to complete the programming.
at the Saturn dealer. or a decent auto locksmith
That depends on the problem. If it's just a battery problem, replace the battery and follow the instructions on the inside of the fob. If the fob has failed, Saturn requires that you take it to a dealer to program the replacement fob.
To add a new key fob, take the vehicle and the key fob to an authorized dealer. To re-program a key fob after replacing it's battery, open the key fob, then read and follow the instructions inside.
The key fob can only be programmed at the dealer.
Saturn Ion was created in 2003.
Saturn is the make, ion is the model.
The fob has a pry slot and prys apart.
2006 Saturn ION
To program a 2007 Saturn Vue key fob, you need to be in the vehicle with all doors closed. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and then back to "Off" five times within 10 seconds. On the fifth turn, leave the key in the "On" position; the locks will cycle to indicate the vehicle is in programming mode. Press any button on the new key fob within 30 seconds to program it, and then turn the ignition off to exit programming mode.
2003 Saturn Ion clunking when breaking
How do you program a key fob to a 2003 Chevy Malibu
The Saturn Ion was never flex fuel capable when it was being manufactured. The Saturn Ion is no longer being manufactured.