Turn ignition switch from OFF to ON 4times within 6seconds,leave ignition switch in the ON postion,Chime should sound to indicate that its in the learning mode,Within 10 seconds press any button on the remote transmitters,Do all other transmitters at the same time.
You can't. Take it to Precision Tune or the Ford Dealer to get it done. They have codes you cannot know. Who wants car thieves running around with programming codes??!!
It's a touchy and intricate process. Look in your owner's manual.
To program a 2003 Ford Taurus remote, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within 10 seconds, press the "Lock" button on the remote for at least one second, then turn the ignition back to "Off." Repeat this process for each remote you want to program, ensuring you complete it within 40 seconds. Finally, test the remote to confirm that it has been successfully programmed.
The 2003 Ford Focus has 16 valves.
The 2003 Ford Focus has an inline 4 engine.
The 2003 Ford Focus has a 5-speed manual.
The 2003 Ford Focus is a gas-powered vehicle.
To program the door locks on a 2003 Ford Focus, first, ensure all doors are closed and the key is in the ignition. Turn the key to the "On" position (not starting the engine), then press the "Lock" button on the driver's door control panel. While holding the "Lock" button, turn the key back to the "Off" position and then back to "On" again. Repeat this process until you hear the locks cycle, indicating that the programming mode is active. After that, you can program new remotes by pressing the "Lock" button on the remote.
The 2003 Ford Focus runs on regular unleaded.
The 2003 Ford Focus's turning circle is 34.3 ft..
The 2003 Ford Focus is 14 ft. 0.1 in. (168.1 in.) long.
The height of the 2003 Ford Focus is 4 ft. 8.3 in. (56.3 in.).