0
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver's door panel-continue to hold
down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the
engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing
transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming
mode.
What else can I help you with?
How do you program a key fob to a 2006 Chevy Malibu?
How do you program a key fob to a 2003 Chevy Malibu
Key fob programming for 2003 Nissan Altima?
trying to set up and program 2003 Nissan altima key fob
How do you program a 2003 deville with a new key fob?
You don't. Take the car and the new fob to a caddy dealer or a locksmith who has the equipment to program it.
Can the key fob from a 2002 silverado be used on a 2003 trailblazer and how do we program it?
Yes it can. If its a lhj011
How do you program a 2003 Saturn vue key fob?
at the Saturn dealer. or a decent auto locksmith
How do you program a 1995 Lumina APV key fob?
To program any kind of key fob you have to take it to a dealership.
How do you re program key fob for Renault laguna1997?
How do I re program my key fob for renault laguna estate 1997?
What is the battery number on a 2003 Honda Accord key fob?
what is the replacement battery for a 2003 Honda accord key fob
How do you program key fob on 2003 ford truck?
To program a key fob for a 2003 Ford truck, first, sit inside the vehicle with all doors closed. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and then back to "Off" eight times within 10 seconds. The doors should lock and unlock, indicating the vehicle is in programming mode. Finally, press any button on the key fob to program it; the locks will cycle again to confirm programming, and you can program additional fobs if needed.
How do you program 2003 GMC ENVOY XL FOB?
To program a 2003 GMC Envoy XL key fob, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Then, press and hold the "Unlock" button on the driver's side door while pressing the "Lock" button on the key fob three times. Release the "Unlock" button, and the locks should cycle to indicate programming mode. Finally, press any button on the key fob to complete the programming process.
How do you program a Saturn 2001 sc2 keyless entry module?
To add a new key fob, take the vehicle and the key fob to an authorized dealer. To re-program a key fob after replacing it's battery, open the key fob, then read and follow the instructions inside.
How do you program key fob for harley Davidson sportster?
http://www.ehow.com/how_7456283_program-key-fob-harley-davidson.html
