take out the bolts
The sensor is located under the oval shaped panel on top of your dashboard. Should pull right up and you will see the sensor attached to the bottom of this panel.
In order to take the dashboard apart on a 2006 F150 you will have to remove between the six clips that are holding it in place. Open the ashtray and begin to gently pull the dashboard away, remove the clips as it begins to come off. You should not have to pull hard or force it.
It pull's off and snaps back on.
pull the hood latch and by the grill to the left of the ford logo there is a handle push it left and there it is
There is a button at the base of one of the supports, push it and pull up.
To remove the air conditioner vent louver in a 1994 Ford F-150, start by carefully prying off the vent cover using a flathead screwdriver or a trim removal tool to avoid damaging the dashboard. Once the cover is removed, you may find screws or clips securing the louver assembly; remove these fasteners. After that, gently pull the louver out of its housing. Be sure to disconnect any attached wiring if necessary, and then you can replace it with a new unit.
pull them off and put new ones on...problem solved
under the dash on the driver side pillar a behind the hood pull
Pull the blown one out, push the new one of same amp rating back in.
To remove the glove box in a 1994 Ford F-150, first, open the glove box and remove any contents. Locate and remove the screws securing the glove box door to the dashboard; these are typically at the top and possibly the sides. Once the screws are removed, gently pull the glove box door out from its hinges. If necessary, disconnect any wiring for interior lights before fully removing the glove box assembly.
pull down the tailgate and the screws to take off the tail light cover. pull that off and it is the bottom bulb
under the dashboard if you pull a lever out it pops down