answersLogoWhite

0

It's the same procedure for most all conventional manual engagement 4wd's. With engine running transmission in neutral hubs locked if equipped, slip shifter into 4wd low. If if dosent want to go in move the vehicle about 6 inches forward or reverse. 4wd high can usually be activated at speeds under 45 mph provided hubs are locked or has auto locking hubs like the tj and yj and Cherokees do.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you engage 4wheel drive on 1999 Jeep Grand Cherokee?

All that you do if put the shifter in the four wheel drive position.


How do you put a jeep cj7 in 4 wheel drive?

Shift the 4 wheel drive lever into 4 wheel drive.


How do you engage 4 wheel drive on a wrangler?

For my 1999 jeep wrangler next to the gearbox to the left it should saw 2 wheel 4 wheel high neutral and four wheel low. What i do is put my jeep in neutral and shift from there


How do you put a jeep cj5 into four wheel drive?

To engage four-wheel drive in a Jeep CJ5, first come to a complete stop. Shift the transfer case lever from the two-wheel drive position to the four-wheel drive position, usually labeled as "4H" for high range or "4L" for low range. Ensure that the vehicle is in neutral while making this shift. Once engaged, you can drive with improved traction on rough or slippery terrain.


How do you put a Chevy Trailblazer into four wheel drive?

To put a Chevy Trailblazer into four wheel driver, locate the four wheel drive component below the instrument panel. While the car is in drive, move the knob into the desired four-wheel drive position.


Can a Jeep Liberty Sport with 4 wheel drive be towed with four wheels down?

A Jeep with 4 wheel drive cannot be towed with all 4 wheels down. You must raise the front two wheels and put the rear wheels on a dolly, or have the Jeep placed on a roll back.


How do you properly engage the 4 wheel drive in your 03 Durango?

If you have a lever, pull it into the four wheel drive position. If a switch, put in four wheel drive.


Can you flat tow a 2004 Jeep Liberty 5 speed manual behind Motor Home?

If it's a two wheel drive model, yes - all you have to do is put the transmission into neutral. If it's a four wheel drive, only if you can put the transfer case into neutral.


Will a 92 straight 6 jeep Cherokee trans fit in a 96?

YES THE TRANNY WILL WORK'.i JUST PUT A FOUR WHEEEL DRIVE TRANNY AND TRANSFER CASE INTO MUY TO WHEEL DRIVE CHEROKEE THE TRANNY I PUT IN WAS OUT OF A 87 AND THE JEEP I PUT IT INTO IS A 96 ALLTHE PLUGS WORKED PERFECT..HOPE IT WORKS OUT FOR YOU...


How do you engage 4 wheel drive in 2001 Jeep liberty?

Put the lever into the 4wd position.


What does it mean part time on a Jeep Liberty?

it means part-time four wheel drive. It will lock the differentials in the front and read of the four-wheel drive cars. Making them harder to turn in extreme turns. But allows equal power to all wheels, which is better for off-road conditions, or extreme weather conditions. Only have it in part time when needed, as it does use a little more fuel if you don't know how to drive with it properly. Always make sure before you switch to and from four wheel drive with the lever on the jeep liberty or any other four wheel drive. put the car in neutral, then turn on/off the 4-wheel drive hi or low, then go back into drive. Do not go faster than 60 mph on 4hi, and no faster than 25 on 4low. If you do not go into neutral before going into 4 wheel drive, you can strip the gears. You can do what I do and switch to and from wheel drive on the fly in the jeep liberty by "flicking" it to neutral, pop the 4 wheel drive lever, then "flick" the stick back into drive. Takes practice to get it right.


How do you put a 2005 Jeep Liberty into 4 wheel drive?

You pull the transfer case level towards you....