0
What else can I help you with?
How do you adjust the torsion bar suspension on a 1986 Nissan pickup to raise its height?
That's a multi page answer, if you want give me an email and I will scan and send you the pages from a maintance manual stapo22
How do you raise an 85 Nissan pickup?
a jack.
Can you adjust the torsion bar to lift the sagging left front of your 2004 Tahoe?
Yes you can Adjust the torsion bar to raise it. I did this on my 1 ton Chevy to raise the front end. I had an alignment right after and it has worked great ever since.
I need to raise the front of my 2009 silverado 4x4 2500 pickup truck I was told there is a screw on both sides that could raise it up to 3 inches but i could not find them.?
There is a bolt that adjusts the torsion bar tension on each side of your vehicle. It is a bolt, not a screw and it is located by section of torsion bar where it is closest to rear of vehicle. Do you know where to look?
How do you raise the front suspension in a 1966 vw beetle?
Raising the ride height of the front suspension is best accomplished by installing adjusters to the torsion housing, or buying a torsion housing (front beam) with adjusters already installed. These adjusters and modified torsion housings (front beams) are available from numerous VW parts sources.
Can the front suspension torsion bars be adjusted to raise and level the sagging front end of a 1994 Nissan Pathfinder that is sitting on the rubber stopper bushings of the lower control arms?
you may want to get them checked for breakage. they shouldn't be sagging that much. new ones would bring the front up easily...
How to raise the front end of a 2009 Chevy Silverado to be level with the rear?
Take the truck to your local Chevy dealer and have them adjust the torsion bars to lift the front and then do a realignment. About 100 bucks. New torsion bar keys are not needed.
How do you adjust the torsion bars on a 2007 silverado?
To adjust the torsion bars on a 2007 Silverado, first, raise the front of the vehicle and secure it on jack stands. Locate the torsion bar adjustment bolts on the lower control arms; these are typically near the front of the vehicle. Use a wrench to turn the adjustment bolts clockwise to raise the front end or counterclockwise to lower it, making small adjustments and checking the height as you go. Always ensure that both sides are adjusted evenly for proper alignment and handling.
How do you adjust the torsion bar suspension on a 1995 Nissan pickup to raise its height?
Raise and support the front end. Follow the bars back to the transmission cross member. There is a large adjusting bolt at the end of each bar. Tigthen it or loosen it according to you preference. Tightening it will raise it. I believe the 95 has nuts above and below the crossmember. Loosen those before you start making adjustment. With a measuring tape match the length of the bolt coming out of the top on both sides to get an equal ride height. Drop the truck on level ground to check your ride height.
How and were is the torsion bar to adjustments on 2001 dodge sport 4x4?
On a 2001 Dodge Dakota Sport 4x4, the torsion bar adjustment is located on the front suspension system. You will find the adjustment bolts on the torsion bar crossmember, which is situated beneath the vehicle, near the front of the frame. To adjust the torsion bars, you'll need to use a socket wrench to turn the bolts, which will raise or lower the front suspension height. Always ensure the vehicle is securely supported before making any adjustments.
How do you raise the torsion bars on a 98 silverado?
You must crank the bolts on the torsion bar clockwise to lift the vehicle
How do you adjust stock torsion keys on dodge truck suspension?
I own a 1989 dodge Dakota and it has torsion bars that can be raised and lowered. Just follow the torsion bars from the front to the back and look at where they stop there should be a 7/8 bolt that you can turn clockwise to raise the truck and counter clockwise to lower it
