haynes techbook automotive computer code electronc engine managament system
turn the ignition on but do not start the car. hold the Off and Red Warmer button on the Climate control panel to the right of your speedometer. hold them until the dash will flash off and on and it will then list you diagnostic codes
turn the ignition on but do not start the car. hold the Off and Red Warmer button on the Climate control panel to the right of your speedometer. hold them until the dash will flash off and on and it will then list you diagnostic codes
On the right side of the instrument cluster there are three buttons press ON/OFF and INFO UP together for 2 to 3 seconds.
Use the climate control unit. with key in on position and engine off press the off and the warmer button at the same time for about 3 seconds. the codes will be displayed. Use the fan speed switch to toggle between codes and to clear.
How to read check engine codes on a 1999 chev 1500 suburban.
what buttons are used to bring up codes on display of 1994 cadillac etc
To clear the ACM (Accessory Control Module) code on a 1997 Cadillac Seville, you can use a diagnostic scan tool to read and clear the codes from the vehicle's computer. Alternatively, you can disconnect the car's battery for about 15 minutes, which will reset the system and clear the codes. However, ensure to check for any underlying issues before clearing the codes, as they may reappear if the problem isn't resolved. Always consult the vehicle's service manual for specific instructions related to your model.
Put ignition key in the on position, push and hold 2 buttons on the A/C control panel OFF and WARM. Then release buttons, and codes will read out. OFF and HI willclear the codes
Put ignition key in the on position, push and hold 2 buttons on the A/C control panel OFF and WARM. Then release buttons, and codes will read out. OFF and HI willclear the codes
To clear the anti-lock brake system (ABS) code on a 1998 Cadillac Seville, you typically need to use a diagnostic scan tool to read and clear any stored trouble codes. After connecting the scan tool, follow the instructions to erase the ABS codes. Alternatively, you can disconnect the vehicle's battery for about 10-15 minutes, which can also reset the system. However, ensure to address any underlying issues that caused the code before clearing it to prevent future occurrences.
radiator
no