answersLogoWhite

0

Find the tensioner, rotate it clockwise. I don't remember offhand what type of tool the tensioner requires for this vehicle... it'll either be a 3/8" drive ratchet inserted directly into the tensioner, or a socket (15mm is typical of GM).

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Release tension on 1991 C1500 serpentine belt?

how to release serpentine belt tensioner on 1991 C1500 Chevy Silverado?


How do you replace a serpentine belt on a 2001 Chevy Impala 3.8?

Loosen the tensioner pulley on your 2001 Chevy Impala. The serpentine belt will become loose. Take the old belt off and put the new belt on. Tighten the new serpentine belt with the tensioner pulley.


Where is the alternator on a 2001 Chevy Impala?

Follow the route of the serpentine belt. It drives the alternator.


Serpentine belt diagram for 2006 Chevy Impala?

There is a diagram under the hood on a decal


How do you tighten the serpentine belt on a 1998 Chevy 3.1 lumina?

usually serpentine belts get their tension(tightness) from the belt tensioner


How do you loosen the belt tension-er on a 2006 Chevy trailblazer?

put a wrench on it as to tighten the bolt. That will release the tension. You can also push down on it but that will require a second person to remove the serpentine belt.


How do you put in a serpentine belt for a 1991 Chevy Astro Van?

Use a socket and ratchet on the 1991 Astro vans serpentine belt tensioner pulley to pull it to the side, letting tension off of the belt. remove the belt and pun the new belt on. Release the tension to hold the new belt on.


How do I release the tension on a 1996 Chevy Monte Carlo for alternator belt?

Near the top of the serpentine belt path is a belt tensioner; it is spring loaded and has a shinney pulley on it. Insert a wrench into this tensioner and pull against it and the tension will be released so you can replace your belt. I am assuming your question is about the serpentine belt.


What was the best selling car in the us in 1962?

chevy impala


How do you loosen serpentine belt tensioner on 93 Chevy silverado?

To loosen the serpentine belt tensioner on a 1993 Chevy Silverado, you'll need to use a wrench or ratchet on the tensioner bolt. Turn the tensioner counterclockwise to relieve tension on the belt. Once the tension is relieved, you can remove the serpentine belt from the pulleys. Make sure to note the belt routing for reinstallation.


How do you release serpentine belt tension on 1986 Chevy Celebrity?

On the belt tensioner you will see a spot to insert a half inch drive breaker bar or ratchet to move tensioner off belt.


What are the release dates for The Car Coach - 2011 2014 Chevy Impala?

The Car Coach - 2011 2014 Chevy Impala was released on: USA: 20 January 2014