It is a vacuum release when the car is shifted into drive or reverse. Also has a manual release lever on the e- brake pedal assy. Good luck
Step on the brake and put the car in drive the brake will release
If the pedal is stuck down, no vacuum to the release diaphragm on the pedal
Put your foot on the brake, pu the car into drive and the parking break should disengage. if not, push on the parking break while holding the break in drive.
Find the release lever next to the brake pedal
In my 83 cadillac sedan deville it up by the break petal next to the firewall.
start the car and put in drive or reverse
One of 2 reasons. Either there is NO VACUUM at the release valve , ( possibly misadjusted PARK NEUTRAL SWITCH ) or the release valve is not working
?What year? I have a 1990 DeVille and there are only two (2) bolts on the backside of the caliper (I think 13mm?) It is sometimes difficult to remove. Be patient in removing them, you don't want to break them---speaking from expirence!!
90 Percent of cruise control problems caused by defective cruise control release switch located near top of break pedal.
if you run your hand from the foot pedal up the brake arm you will feel a little latch on the right side of it... pull that forward
The brake indicator light is for the EMERGENCY break, release this break.
I will break the glass only if there is a fire emergency, as indicated in case of emergency procedures.