answersLogoWhite

0

Remove the gas cap, and then look for a Schroeder valve on the fuel rail. If there is no valve, then you cannot relieve the pressure. Just be prepared for a spay of fuel when you take the fuel filter off. Wrap a rag around the coupling as you loosen it.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Where is the fuel pressure regulator located on the 2004 silverado 6.0 vortec?

On the 2004 Chevrolet Silverado with a 6.0L Vortec engine, the fuel pressure regulator is integrated into the fuel pump assembly, which is located inside the fuel tank. To access it, you'll typically need to remove the fuel tank, as the regulator is not externally accessible. It's important to relieve fuel system pressure before attempting to service it.


What is the code po432 on a Chevy Silverado?

This code is on 2004 Chevrolet silverado po. 432 what does it mean or affects on this truck?


Where is the fuel filter located on a 2011 silverado truck?

On a 2011 Chevrolet Silverado, the fuel filter is integrated into the fuel pump assembly, which is located inside the fuel tank. To access it, you typically need to remove the fuel tank from the vehicle. It’s important to relieve the fuel system pressure before attempting to remove the tank for safety reasons.


What is wrong when the AC Compressor in my 2003 Chevrolet Silverado 1500 cuts on and off?

The most likely cause is the system is low on refrigerant. The second would be a defective pressure cycling switch.


Need a diagram for 1993 Chevrolet Silverado AC system?

A diagram of a 1993 Chevrolet Silverado AC system can be found a local auto part chains. These stores are connected to an online data bases which have diagrams for many vehicles mechanical systems.


Does a 2005 Chevy silverado have a tire pressure monitoring system?

no


What is the location of the oxygen sensor on a 1998 Chevrolet silverado?

They are screewed into the exhaust pipes--SYSTEM. I belive there is 3 of them in exhaust system. There is none after the muffler.


Where is inertia switch on 1998 silverado?

Chevrolet does not use inertia switches. The fuel system is computer controlled with relays.


What is the function of the pressure valve in radiators?

To relieve excess pressure in cooling system exceeding predetermined value.


Where is the low pressure service port on a 2000 silverado Chevy?

On a 2000 Chevrolet Silverado, the low-pressure service port for the air conditioning system is typically located on the larger diameter pipe that runs between the evaporator and the compressor. It's usually near the passenger side of the engine compartment, close to the firewall. The port is usually capped with a plastic or metal cap and is smaller than the high-pressure port, which is located on the smaller pipe. Always ensure the engine is off and the system is not under pressure before attempting to service it.


What is air system bank 2 on a 2000 Chevrolet Silverado?

Check your connections and the air injection check valves. -Jager


What does the code mean P1416 on a 2000 Chevrolet silverado?

Trouble code P1416 means: AIR System Bank 2