There are two bolts behind your seat. Use a socket to remove the bolts. Lean your seat all the way back because the front of your seat is like a hinge. Tilt the whole seat forward and when it hits your steering wheel, lift up. Your seat should come out.
How do you remove the rear seat on a 2002 diamante
No you can not. You will have to remove the gas tank.
If there is an access panel, yes. If not you will have to remove the tank.
I have a 2002 Chev S10 and two grandchildren so far, of which the oldest is 3. Of course the car seat belts into the passenger seat -front.
To remove the 2002 Hyundai accent rear seats find the tabs that cover the bolts and unbolt them. After the bolts are out lift the seat to remove it from the car.
The bottom portion of the seat will pull out but the back of the seat will have to be unbolted and then slid out to access the trunk.
It is under the passenger seat, you will have to remove the passenger seat then the rug will have to be pulled back to access the module.
There are five steps on how to remove the back seat in a 1997 Chevy Malibu. Some of the step-by-step instructions are open the trunk lid, pull the top portion of the backseat all the way down, and then pull the top portion of the backseat all the way down and locate the hinges from which the seat pivots.
There are bolts that you must remove in order to take out the front seats of a 2002 Monte Carlo. There are two in the back of the seat and two in the front of the seat. If you have heated seats you will also have to remove the wires for that before you take the seat out.
its under the back seat
The rear seat on a 2002 Hyundai has bolt behind the seats. Push the seat down to reveal the bolts, and loosen them. The seat will be able to be removed from the vehicle.
Seat bottoms just pop up, has clips. seat back have bolts to remove. Need to remove bottom first.