0
I owned one of these many moons ago. 77 Type LT. If there is a chrome molding around the windshield, you will need to remove this. They make a molding removal tool which you can purchase at NAPA. I would purchase this if you don't have one as you will more than likely bend the molding without it.
Once any molding is removed, use a razor blade on an edge (like next to a side window support). Remove the glue around the area and start working it under the edge. Once you get a small slit here is what you can do to make the job quicker. Get some very fine wire. Single strand, not multi strand. Steel wire works great. The stuff your looking for is like piano string or 12lb test fishing line. Than get yourself two pairs of vice-grips.
You'll need a friend for this part forward. Feed a 3ft section of wire through the crack you made in the adhesive. Use a screwdriver or something thin to help push it through. Have one person get inside and one outside and connect a pair of vice grips to both ends. Work together, one person hold and the other pull and it will cut through the adhesive. Do this all the way around the window. once you have gone all the way around, remove the wire and have the person on the inside carefully push out (use gloves just in case). Remove the old windshield.
Your not done yet. Now you have to go around and clean all the old adhesive off the frame. Once you feel you have it all, use an alcohol or mineral spirits and wipe it down. Let it dry. Pick up a windshield seal at an autoparts store and carefully unroll it around the window frame. Once it is all the way around and set on the same line as the old stuff was, get your friend again. One on each side and bring the windshield up. Carefully mindful of the alignment, gently press the windshield into the adhesive. If your in a cold climate you better do this in a heated garage. You can use a heat lamp or blow dryer to speed up the drying process. Put your moldings back on after a day and your good to go.
What else can I help you with?
How do you remove a heater core from a 1977 camaro?
Remove the glove box it should be behind it this will take most of your day up
Can you put steel bumpers from 1977 Camaro on a 1978 Camaro?
No, the steel bumpers from a 1977 Camaro will not fit in a 1978 Camaro, As the 1978 "Bumper" is part of the front end. Taking off the 1978 "Bumper" would mean cutting it off, which would make the car look like something else.
How do you fill windshield washer fluid on 1977 Porsche 911?
To fill the windshield washer fluid on a 1977 Porsche 911, open the front trunk and locate the washer fluid reservoir, which is typically found near the driver's side. Remove the cap from the reservoir and pour in the appropriate windshield washer fluid, ensuring it doesn't overflow. Once filled, replace the cap securely. Always check the fluid level periodically to ensure proper operation.
Will a 1973 Camaro front spoiler fit a 1977 Camaro?
No, 74 on had the big 5mph bumpers, totaly different. Good news is you can sell that 73 and buy the other and have money left over.
What is the firing order for a 1977 Chevy Camaro 350?
1,8,4,3,6,5,7,2. From front to back, Driv. side- 1,3,5,7 Pass. side- 2,4,6,8.
What year is the old Camaro in Transformers?
1977
Will a windshield from a 1977 Monte Carlo fit an 1977 El Camino?
Yes
Will a 1977 Monte Carlo windshield fit an 1977 El Camino?
Yes
What was the first year for T Tops in a Camaro?
1977
Will interior dash out of 1986 Camaro fit a 1977 Camaro?
No, they're from 2 totally different bodystyles
How do you fill windshield washer fluid in 1977 Porsche 911?
To fill the windshield washer fluid in a 1977 Porsche 911, open the front trunk and locate the washer fluid reservoir, which is typically a small, plastic container near the driver's side. Remove the cap from the reservoir and pour in the appropriate washer fluid, ensuring it is suitable for your climate. Replace the cap securely after filling. It’s advisable to periodically check the fluid level, especially before long drives.
In transformers what type of car is Bumblebee?
Bumblebee starts as a 1977 Camaro and transforms later in the movie to a 2008/2009 Camaro
