use a woodchuck!
To replace the Engine cooling fan relay on a 1988 Deville you need to remove the radiator. After the radiator is out you will see the relay, disconnect it pull it out and install the new one.
1.Remove the radiator and cooling fans as a single assembly 2.Remove the bolts and separate the fan/shroud assembly from the radiator 3.Remove the clip and detach the fan blade assembly from the motor shaft 4.Remove the screws and detach the fan motor from the shroud
chevy 2003 monti carlo how to replace a cooling fan assembly
The cooling fan relay is located below the battery on the side of the chassis. It is held by 2 small I think 8mm bolts. It is best to use a socket to remove it. You will need to remove the air box first.
unplug the connector remove the screws holding it in place reverse procedure to reinstall
The 2000 Chevy Cavalier cooling fan shroud is held in place with 10 retaining bolts. Remove the retaining bolts and the cooling fan shroud will come off.
Where is the cool fan relay on a dodge stratus and how do you replace it
To replace the cooling fan in a 1993 Chevy Corsica, first, disconnect the negative battery terminal to ensure safety. Remove the fan shroud by unscrewing any bolts or clips that hold it in place, then disconnect the electrical connector from the fan motor. Next, unfasten the mounting bolts securing the fan to the engine and carefully remove the old fan. Install the new fan by reversing the disassembly steps, reconnect the electrical connector, and reattach the battery terminal.
Remove the bolts, remove offending fan and replace with new one
To replace the cooling fan relays on a Chevy Venture 3.4, first, locate the relay box, which is usually found in the engine compartment near the battery. Remove the cover of the relay box, and identify the cooling fan relays based on the diagram on the cover. Pull the old relays straight out of their sockets and replace them with new ones, ensuring they are seated properly. Finally, reattach the relay box cover and test the cooling fans to ensure they are functioning correctly.
Drain coolant Remove fan shroud Remove upper and lower hoses Remove transmission cooling lines Remove upper bolts Slide up off carriers
You either remove the front bumper assembly or you remove the passenger side head light and cut a access hole.