0
What else can I help you with?
How do you install heater core in 88 Lincoln mark 7 lsc?
you must remove the steering column and dash board and disconnect the a/c and heater hoses from the firewall. it might help if you remove the upper intake to provide you easier access/but the dash has to be completely removed. hope this is helpful
What is the yellow exclamation mark on a transit van dash board?
It is the passenger eject button.
What is the squiggle lines around the question mark on the dash board?
on our car it is the flat tire symbol
How do you remove your Lincoln Mark VII dash bezel?
special tool search eBay
What does a puncatation mark of a dash look like.?
A dash mark looks like this (-)
On your BMW 325i 1994 e36 a Yellow cog with exclamation mark inside lit up on the dash board what does it mean?
Transmission error
What does the exclamation mark symbol on the dash board of a Chrysler 300 mean?
The computer has set a code that will have to do with the electronic throttle system. Have it checked for codes with a scanner.
How do you lower the steering column to remove the ignition switch on a tilt-telescopic 1972 Corvette?
Once you remove the dash plastic surround, you will find two bolts that hold the column up into the dash. As you loosen these bolts, the column will drop into your lap. I hope this helps you. Mark
What does the dash called?
The dash is a punctuation mark commonly called a "dash," and there are two main types: the en dash (–) and the em dash (—). The en dash is typically used to indicate a range of values, such as dates or numbers, while the em dash is often used to create a strong break in a sentence or to set off a thought. Both serve distinct purposes in writing, enhancing clarity and emphasis.
What does the orange triangle mark mean light mean on a vauxhall zafira?
that means nothing just open tne dash board and put a cardboard on the light and light will vanish ,,,,,,,,,,dont worry
How do you replace an ecu computer 1997 mark 8?
Up under the dash, drivers side by the steering column, remove the black plastic clip, pull the ECU from the sleeve, remove the bolt that holds the wiring in and then remove. Don't forget to disconnect the battery first.
How can you efficiently square a board for a woodworking project?
To efficiently square a board for a woodworking project, use a combination square to mark a straight line across the width of the board. Then, use a hand plane or a table saw to carefully remove material until the board is square. Check for squareness by measuring the diagonals of the board, adjusting as needed until they are equal.
