Remove the door panel.Remove the bolt from the inside of the door that holds the handle on.
Did you figure it out
The exterior door handle on a Ford Fusion is replaced by first removing the inner door trim, retaining bolts, and window knob. The door handle can then be unbolted from the frame and a new one put in its place.
Remove the door panel. Drill out the rivets in the exterior handle with a 1/4 drill. Carefully pull the handle out and disconnect the pull rod. Use small bolts and lock nuts to reattach.
Its on youtube
inside door handle of a ford courier
how to remove front outer door handle on a 2013ford fusion
Hi about removing the door handles from ford fiesta there is no problem doing this when you open the door on the side of the door you will see a screw in line with the handle take this screw out and when you do this catch the handle as if you were opening the door take it handy the back part of the handle will come out then gust wiggle the front bit out bob your uncle Frank
you first need to remove the door panel so you can see what is brocken which is done by moving the door handle up and down while looking at the moving parts insid the door. it could be a broken clip which attaches to the latch
You will need to remove the inside door panel of your Mustang. Remove the linkage from the outside door handle. Remove the outside door handle retaining bolts. Reverse the process to install the new outside door handle.
will rear door handle work on the front door 2006 ford fusion
To remove the inside door panel of the Ford F250, first open the door and remove the screws for the door handle. Then, pry the door skin off of the inside starting at the bottom of the door.