pry it off with a screwdriver
Will a 2005 chevy silverado cap fit a 2008 chevy
18436572
Its on the overflow tank.
It's on the coolant reservoir.
2 screws one front and one back the coil is the thing the short wire goes to
remove the wheel,remove the brake caliper assy,remove the dust cap in the center of the axle.remove the cotter pin.remove the nut.then pull the hub off
Take wheel off, remove brakes/caliper, remove dust cap, remove cotter pin, remove nut/washers and its off
Dealer? Salvage yard?
Absolutely
it is under the roter cap.
0.040 inch.
You will need to remove the tire and wheel. Remove the axle end cap. Remove the wheel bearing seal. Remove the wheel bearing. Reverse the process to install the new will bearing.