Open hood and remove all the bolts on the seam (including the prop rod). One bolt will be in the space between the grille and the bumper. Remove the bolt holding the hood hinge. Put a flat screw driver or flat chisel between the two pieces of metal held together with a rivet and gently pry (there are two, and they are located between the door and fender). You do not neeed to remove the fender liner.
very carefuly
Does anyone know the proper way to remove the clutching fan on a 2000 Chevy express van 3500 5.7 ltr?
terrible results
Yes, It's the samething.
No it will not. There is no comparison not even close.
How to remove steering wheel on Chevy lumina 2000
it is under passenger side wheel fender
You must remove the entire rear fender.
Remove left front wheel, remove inner fender well, remove battery.
To remove the driver side fender on a 2000 Pontiac Grand Am, start by disconnecting the battery to ensure safety. Then, remove the screws and bolts securing the fender, which are typically found along the top edge, inside the wheel well, and at the front of the fender. You may need to remove the wheel and inner fender liner for easier access. Finally, gently pull the fender away from the body, taking care not to damage any attached components.
remove headlight there is 2 bolts there ,remove enter fender there is one nut that bolts the bumper to the fender,there is two bolts at the bottom of the fender next to the door.then one bolt in the middle of fender next to the door. then you got the bolts on top of fender under hood
bottom passager side