0
What else can I help you with?
Where is voltage regulator 96 olds 88?
It's a component of the alternator.
How do you release the tension from the belt tensioner on an Olds 88 3.8 FI and what tool do you use?
Hey Duane==I think I use a wrench on the bolt that holds the pulley to the bracket for the idler. I think it is 13mm. Goodluck, Joe
Will a motor from a 91 Olds 98 fit an 96 olds delta 88?
A motor from a 1991 Oldsmobile will fit into a 1996 Oldsmobile Delta 88. The motor mounts will need to be changed.
What would cause a 96 olds delta 88 not to start or windows work?
maybe its just time for you to get a new car
Does a 93 Olds Delta 88 support OBD II?
No OBD II only reads 96 models to current
Change power steering pump 96 Oldsmobile 88?
how to remove powersteering pump
Is there any way to disable the automatic door locks on a 96 Olds cierra?
Remove the fuse.
Car starts and then turns off?
96 olds 88 runs for 20-30minutes shuts off wait 10 minutes starts up
What is the GCF and LCM of 88 110 96?
The LCM of 88, 96, and 110 is 5280. The GCF is 2.
What is the gcf of 88 and 96?
The GCF of 88 and 96 is 8. You are left with 11 (88/8) and 12 (96/8). You cannot further divide these by a common factor
Where is the tensioner pulley on a 96 Chevy Caprice?
It is the small pulley with a nut in the middle on the pulley assembly!
How do you replace the belt tensioner of a 96 Maxima 30?
Loosen the bolt in the center of the idler pulley. Then loosen the pulley and remove the belt. There is 3 bolts behind the idler pulley that remove the entire pulley assembly. One is located above the pulley to the top right and the other 2 bolts are below the pulley on either side. It will help to take the wheel off and remove the plastic access panel behind the wheel to the front side of the axle. Then you can drop the pulley out from the bottom and replace the pulley or whole assembly either one at this point. Reverse instructions to reassemble.
