It depends on how the partition is installed. Some are bolted in, some are riveted in. Either way any fasteners need removed.
It depends on how the partition is installed. Some are bolted in, some are riveted in. Either way any fasteners need removed.
get a person who know how to do it
To remove the dash speakers in a Dodge Sprinter, first, disconnect the vehicle's battery to ensure safety. Then, carefully pry off the speaker grille using a flat tool to avoid damaging the dashboard. Remove the screws securing the speaker and gently pull it out from the dash, disconnecting the wiring harness. Finally, repeat the process on the opposite side if needed.
Carefully remove the A pillar cover.. Then pop out the speaker screen..
YesYes
For my 2008 Sprinter the mirror and swivel slide up leaving just the small bracket attached to the windshield.
A specific Sprinter trans fluid available from Dodge or Mercedes.A specific Sprinter trans fluid available from Dodge or Mercedes.
Dodge started to sell the Mercedes Sprinter in 2002.
It is a special fluid for the sprinter only. Dodge calls it Sprinter/Crossfire trans fluid.
The Dodge Sprinter is a large vehicle, suitable for either passengers or cargo. Compared to similar vehicles, the Dodge Sprinter has limited horsepower and towing capability.
A Dodge Sprinter uses a paper cartridge filter.
The battery on the Dodge Sprinter is under the driver side floor.The battery on the Dodge Sprinter is under the driver side floor.
To remove a Dodge Sprinter dashboard, start by disconnecting the battery to ensure safety. Next, remove any screws or bolts securing the dashboard, typically found around the instrument cluster and under the steering column. Carefully detach any wiring harnesses and clips connected to the dashboard, taking care not to damage them. Finally, gently pull the dashboard away from the frame, ensuring all connections are free before completely removing it.