Disconnect batt, remove wires from back & bolts (2) at 6 & 12 o'clock. If serpentine pry idler to remove belt first.
You have to remove the brake master cylinder and remove alternator through there.
A damaged strut needs to be replaced.
To remove the inlet manifold from a 1990 Ford KF Laser with a carburetor, first disconnect the battery and remove any accessories or components obstructing access to the manifold, such as the air cleaner and intake hoses. Next, detach the carburetor by unscrewing it from the manifold and disconnecting any linked throttle or choke cables. Then, remove the manifold bolts in a crisscross pattern to prevent warping, and lift the manifold off the engine. Be sure to clean the mating surfaces before reinstallation to ensure a proper seal.
How can you get the stereo out of the sr2
Hey, I have a 1991 kf laser 1.6L and it is a 'B6-2E' engine and the number is on the block.
Wilson the tensioner pulley and remove the alternator belt. Remove the wiring to the alternator. Remove the alternator retaining bolts. Remove the alternator and replace with a new alternator.
Remove the belt from your 1985 Nissan 300 alternator. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. The alternator will come off.
which pully do i remove tension to remove the alternator?
how do i remove a alternator
You will need to remove the alternator belt. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Remove the cables from the alternator. Remove the wiring harness. Remove the alternator belt. Remove the retaining bolts. Reverse the process to install your new alternator.
Begin by loosen the tensioner bolt. Slide the alternator to the left and remove the belt. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts.