I was just looking at my neighbor's car which we think has a bad switch. It looks like once you have the top cover off, there are four Phillips screws and 2 torx that are on a steering shaft guide. Once they are removed, it seems like it should come off. The plug is on the left side of the steering wheel. I might know more tomorrow. Good Luck! "E"-Chgo
To remove the ignition switch on a 1992 Geo Metro, first disconnect the negative battery terminal to prevent any electrical shorts. Then, remove the steering column covers by unscrewing the screws that secure them. Once the covers are off, locate the ignition switch, which is typically held in place by screws; remove those screws and disconnect the electrical connectors. Finally, pull the ignition switch out of the steering column and replace it if necessary.
www.advanceautoparts.com
To replace the heater switch in the dash of a 2000 Metro, first disconnect the car battery to ensure safety. Remove the dash panel covering the switch by unscrewing any screws and gently prying it off. Disconnect the wiring harness from the back of the old heater switch and remove it from the dashboard. Install the new switch by connecting the wiring harness and reassembling the dash panel, then reconnect the battery.
To replace the dimmer switch on a 2000 Chevy Metro LSI, first disconnect the negative battery cable to ensure safety. Remove the dashboard cover or panel to access the switch, typically held in place by screws or clips. Disconnect the wiring harness from the old dimmer switch, then remove it from the dashboard. Install the new dimmer switch by reversing the process, reconnecting the wiring, and securing everything back in place.
I am tring to remove and install a water pump on a Chevy metro 2001 lsi.I would like some advice on how to remove and install a water pump.Thanks.
I have a 98 neon and you take out the 3 screws on the underside of the steering colum .this take off the cover so you can see everthing.you will see a coulpe of screws that hold it in place ,unplug the wires and unscrew it .
Remove the cables from the alternator. Remove the wiring harness. Remove the alternator belt. Remove the retaining bolts. Reverse the process to install your new alternator.
how can I cheek the heater fan on my 1990 geo metro to see if it is bad or if the switch is bad. I want come on at all when you turn the switch on check fuses and they are good.
Remove the cables from the starter. Remove the three retaining bolts from the starter. The starter will come out. Reverse the process to install the new starter.
depends on years storm and tracker are more closely related call parts house and compare part numbers
A 1995 Geo Metro ignition coil is tested by measuring the resistance across the coil. If it exceeds the manufacturer's recommendation, it must be replaced.
To delete the old version of mail@metro: *Click on @metro *Click on "Settings" *Click on "Manage Apps" *Click on "mail@metro" *Click on "Remove"