First open all the doors, remove the pillars and other side plastics, then just pull it off.
== ==
basically just remove the bolts holding it up, disconnect the harness, remove and replace!
you suck it up
To replace the axle seal in a 1989 GMC Sierra, start by removing the wheel and brake components to access the axle. Next, detach the axle from the differential by unbolting it and gently pulling it out of the housing. Remove the old seal using a seal puller or a flat tool, clean the area, and then install the new seal, ensuring it is seated properly. Reassemble the axle, brake components, and wheel, making sure to torque all bolts to the manufacturer's specifications.
To remove the interior trim in a 1989 GMC 1500 step-side for headliner repair, start by carefully prying off any plastic trim pieces using a trim removal tool to avoid damage. Next, locate and remove any screws securing the trim, which are often hidden under small covers or behind other panels. Once the screws are out, gently pull the trim away from the roof, taking care to disconnect any clips or wiring if applicable. Finally, set the trim aside for easy access while you repair the headliner.
Remove oil pan for access
remove the old belt and remove your trouser's belt off and put into the fan
remove the screws holding the ring around the light then remove the light.
Yes you do and its a pain
In order to replace a clutch on 1989 Acura Legend, you would have to remove the old one. You will do this by removing the jam nut that holds the pedal and disconnecting it from the throttle cable and replace it with a new one.Ê
no you cant. to replace the fuel pump for this model you have to remove the fuel tank. to remove the tank you have to pick up the car.
You can order the part at carpartsdiscount.com installation is easy. Just remove the clamps remove the hose replace the clamps with the new hose.