You will have to pull up the seat fabric on the backrest enough that it exposes the area where the armrest is mounted. Inside you will see the pole from the armrest coming into the seat, held in place with a sort of horseshoe shaped clip. The clip also has a rubber band holding the two open ends tight together. Using needle-nose pliers, remove the rubber band. Then take screwdriver and push the clip backwards out of it's groove. The armrest will then come right out.
For re-installation: before placing the armrest back on, attach the clip and the rubber band and re-seat the fabric properly. Once the seat is ready, simply shove the armrest through the hole and you will hear a "click" meaning the clip has grabbed the armrest.
parts needed for a tuneup on 2004 chevy express 3500 van
i have a 2004 chevy express cargo van and i cant find the fuse box
how to change the serpentine belt on 2003 Chevy express 2500
How do I replace the heater core in a Chevy express 1500
how to change front left turn signal bulb on a 2004 chevy express
jtd
check your owners manual
The resistor for the blower motor on a 2004 Chevy Express van is typically located under the dashboard on the passenger side, near the blower motor itself. It can usually be found mounted to the HVAC housing. To access it, you may need to remove some panels or the glove compartment for better visibility and reach.
where is my singnals and hazard flalsher on my 2004 Chevy Monte Carlo
5w-30.
On a 2004 Chevy Express 2500 van, the blower motor resistor is typically located under the dashboard on the passenger side. It is mounted near the blower motor, usually within the HVAC housing. To access it, you may need to remove the lower dash panel and possibly the glove compartment for better visibility.
remove and replace engine coolant temperature(ect)/chevy 2004 trailblazer