0
You have to remove the driver and passenger side insulator panels. They come off with clips and a couple screws, Then take the dash off, there is a few screws around, then move the wheel to the lowest position and the shift to first, so you'll need the key in ignition, then pull off the dash from the retaining clips from right side to left then there's about 4 screws around the radio, unscrew them and disconnect the cables.
What else can I help you with?
How do you fix 2003 impala radio?
The radio on a 2003 Chevy Impala can be typically be fixed by replacing the fuse. If the radio does not work when powered, it will need to be replaced with a new unit.
How do you remove the radio in a 2003 Chevrolet Impala?
To remove the radio from a 2003 Chevrolet Impala, first, disconnect the negative battery cable to ensure safety. Then, use a flat-head screwdriver to gently pry off the trim panel surrounding the radio, starting from one corner. After removing the trim, unscrew the radio mounting screws, pull the radio out of the dashboard, and disconnect the wiring harness and antenna cable from the back. Finally, reverse the process to install the new radio.
How do you remove the temperature controls on a 2003 Impala?
you smash it
Replacing heater core in 2003 Chevy impala?
do you need to remove dashboard in 2003 chevy impala to replace heater core
How do you remove the factory radio in a 2003 Ford Crown Victoria?
there should be two holes, vertically, on each side of the radio, you can make a tool out of a coat hanger to stick into each side, when you have placed your homemade radio tool into the holes, simultaneously, you should be able to pull the factory radio out
How do you remove a hazard light switch in a 2003 impala?
lollolol
How remove the radiator from 2003 Chevy Impala?
i need a step by step instruction on how to remove or replace a radiator of a 2005 3.4L chevy impala
What kind of antifreeze should be used for a 2003 Chevy impala?
They use Dex-cool from the factory.
What is the serpentine belt 2003 impala?
you have to remove the belt tensioner to remove the belt off of the engine.
How do you take radio out of 2003 grand marquis?
remove radio from a grand marquis 2003
How do you install an aftermarket stereo in a 2003 Montana?
To install an aftermarket stereo in a 2003 Montana you need to first buy a trim plate or a mounting bracket. Remove the dash panel. Disconnect the ground cable from the battery. Remove the factory stereo. Unplug the factory wiring harness from the radio. Connect the new radio. Test it and reassemble the dash. Reconnect the negative battery terminal.
How do you unlock radio on a 2003 Chevy Impala?
By taking your car to a GM Dealership. They have the special equipment to do it.
