you havent said if its a mk1 or 2 but have just recently changed my mk1 front bumper and is straight forward. If you put your car on ramps or axle stands and get underneath the car, you will find you will have to remove the splash guard with a Allen key, cant remember what size but these are all accessable. Once this is removed then proceed to look up in line with the wheel arch lining on both sides and you will see 2 bolts on each side of the car, these are 13mm. undo these and then undo the screws holding the inner arch lining out and just pull the front bumper off its slide mounts at the sides and the whole assembly comes out. Hope this helps you with your problem
you havent said if its a mk1 or 2 but have just recently changed my mk1 front bumper and is straight forward. If you put your car on ramps or axle stands and get underneath the car, you will find you will have to remove the splash guard with a Allen key, cant remember what size but these are all accessable. Once this is removed then proceed to look up in line with the wheel arch lining on both sides and you will see 2 bolts on each side of the car, these are 13mm. undo these and then undo the screws holding the inner arch lining out and just pull the front bumper off its slide mounts at the sides and the whole assembly comes out. Hope this helps you with your problem
No it won't I'm afraid, they're just too different.
how to remove front bumper on citroen berlingo
how to remove front bumper 2002 Impala
How to remove the front bumper to a 1998 Nissan Altima?
Yes, you can fit a ST24 front bumper on a Mk3 Mondeo, but it may require some modifications for a proper fit. The ST24 bumper is designed for the Mondeo's specific model, so ensure compatibility with your vehicle's mounting points. It's advisable to check for any potential differences in the grille and fog light placements as well. Professional installation may help achieve the best results.
The Toyota Corolla front bumper is held in place with eight retaining bolts. Remove the retaining bolts and the bumper will come off.
The rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off. Reverse the process to install your new rear bumper.
Does anyone know how to remove the chrome part of the front bumper on a Ford Ranger XLT
how do i change the front bumper on my 1999 vauxhall vetra
You shouldn't own a chevy if you can't figure out how to remove the bumper
The 1991 Honda Civic front bumper is secured by eight retaining bolts. Remove the retaining bolts. The bumper will come off.
== ==