The seat rails are bolted to the floor of the passenger compartment. Remove the bolts and any connected wiring and the seat should be easily removed.
Saturn Ion Has 2 seats in the front and 2 seats in the rear.
Saturn Vue Has The 2 Front Seats And Also The Rear Seats Which Can Hold Up To 3 People By Law...
How to remove front seats on 1971 vw Beatle
There are bolts that hold down the seat rails. The bolts go through the floor, and if you remove them, the seats lift right out. Move the seats back to loosen the front bolts, then move the seats forward to remove the back bolts. Don't forget to disconnect the electrical plugs since you don't want to destroy the sensors and seat controls.
To remove the second-row bucket seats in a 2008 Saturn Outlook, first, ensure the vehicle is on a flat surface and the seats are unoccupied. Locate the release levers or bolts securing the seats to the floor; these are typically found at the front of the seat base. Pull the release levers or remove the bolts with a socket wrench, then tilt the seat forward and lift it out of the mounting brackets. Finally, carefully pull the seat out of the vehicle.
Yes. All Seats from Saturn S-series cars are compatible from 91-02, except for the back seats. For example: You cannot use an SC1 back seat in an SC2.
There are bolts that you must remove in order to take out the front seats of a 2002 Monte Carlo. There are two in the back of the seat and two in the front of the seat. If you have heated seats you will also have to remove the wires for that before you take the seat out.
remove the bolds to the seats. you will just have to look around for them. if i can remember right, they are in the front of the back seats, like the front lip, somewhere.
100 cubic inches up to the front seats
Use an axe
The easiest way is to remove the front seats from a Honda Accord dx 2004 is with the brackets attached; that way you should just have to unbolt them from the floorboard.
how do you remove the back seat in the 2003 poniac grand am