On my 95 aspire the fuel pump went out and I had to take out the back seat and the fuel tank is there along with the fuel pump.
why is the fuel pump located on the ford 1995 aspire
One
They are self-priming.
remove rear seat and then remove access panel
To change the fuel injector on a 1995 Ford Aspire, start by safely disconnecting the battery and relieving the fuel system pressure. Remove the intake manifold or necessary components to access the fuel rail. Disconnect the fuel lines and electrical connectors from the injector, then remove the old injector and replace it with a new one. Reassemble everything in reverse order, ensuring all connections are secure before reconnecting the battery and testing the system for leaks.
The fuel pump is in the fuel tank as on all modern vehicles, and you'll have to remove the fuel tank to access it.
A ( 1996 ) Ford Aspire has a 38 liter / 10 U.S. gallon fuel tank .
Yes
The 1995 Ford Aspire has a curb weight of approximately 2,200 pounds (around 998 kg). This lightweight subcompact car was designed for fuel efficiency and urban driving. Its compact size and low weight contribute to its nimble handling and economical performance.
I believe it is one of the three relays under the dash, and adjacent to the clutch pedal or brake pedal if you have an automatic transmission. Assuming it's the same as a 94 ford aspire.
On a 1996 Ford Aspire, the fuel injectors are located on the intake manifold, directly above the engine cylinders. To access them, you'll typically need to remove the intake manifold and any associated components, such as the throttle body and air intake. The injectors themselves are seated in the fuel rail, which supplies fuel to each injector. Be sure to relieve the fuel pressure before attempting to remove any components.
The fuel pump is located above the fuel tank, which is right below the backseat. You have to unbolt the backseat and lift it up. There will be a panel underneath that you need to open up. There it is!