with your cox
1996 rodeo- how to remove key from lock ignition?
Remove the retaining ring from the top of your 2000 Mercedes-Benz ignition lock cylinder. Slide the ignition lock cylinder out and remove the wiring harness.
Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.
no the switch can be independly remove from the back side of the ignition lock
Remove the retaining ring at the top of your Chevy S 10 ignition lock cylinder. Slide the ignition lock cylinder out. Remove the wiring harness from the back of the ignition lock cylinder. Reverse the process to install the new ignition lock cylinder.
Begin by removing the retaining ring at the top of your 1994 Ford ignition lock cylinder. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the ignition lock cylinder. Reverse the process to install your new ignition lock cylinder.
Removing a ignition lock cylinder from a 2002 ford windstar with no key
== ==
To remove the ignition lock from a 1969 Camaro Z28, start by disconnecting the car battery to ensure safety. Then, remove the steering column cover by unscrewing the retaining screws. Insert the key into the ignition and turn it to the "Run" position; you’ll need to locate and press a release tab or pin on the ignition lock cylinder to pull it out. Finally, withdraw the ignition lock cylinder from the steering column.
Begin by removing the retaining ring at the top of your 1996 Chevrolet Silverado ignition lock cylinder. Slide the ignition lock out and remove the wiring harness. Reverse the process to install your new ignition lock cylinder.
Remove steering wheel Remove Steering lock plate Place ignition in on position Depress lock pin now exposed. If this is not possible, drill out lock pin.
I just replaced the ignition switch and lock on my '96 Escort. They come as one unit, so you can't just replace the lock tumbler. Remove the steering wheel (using caution for the airbag), and then remove the multi-function switch. Now you can remove the ignition switch and lock.