To remove the ignition switch in a 1981 Corvette, insert the key into the ignition while leaving it in the "off" position. Insert a straightened paper clip next to the key, turn the key to the "Acc" position, pull the key and clip out together, and place the coil down.
Begin by removing the decorative radio cover from your 1981 Chevy Corvette radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
Remove the large bolt behind the visor,then move the handle down that unlocks the roof.
Remove the fuse labled theft. It is in top lh corner
diagram of motor od 1981 corvette
what could be pulling the battery down in a 1981 corvette
You can remove the ignition switch, on your 1981, Monte Carlo, by removing the retaining clip. With the retaining clip removed, whole the switch out and remove the wiring.
http://corvette-world.com 178 inches.
it depends on what style of 81 corvette, But a doubt it would work.
To remove the ignition switch on a 1981 Dodge pickup, first disconnect the battery to ensure safety. Then, remove the steering column cover to access the ignition switch. Disconnect the wiring harness from the switch, unscrew the mounting screws, and carefully pull the switch out. Finally, replace with a new switch and reassemble the steering column cover and battery connections.
, if you found the fuse panel diagram for the 1981 Corvette I would like a copy please. My wife drove the car yesterday and adjusted the power seat and know none of the switches work and I think it's a fuse. She is 5'4" and I am 6'1" so now I cant drive my car. My e-mail address is baitnbobber@comcast.net. Thanks
There is no computer.
190hp